250TV-SPGEM high pressure slurry pump single shell structure
5.4~352 L/s Flow
- The pump has a single shell structure, light weight, small size,
easy installation and maintenance.
- The shell is made of wear-resistant metal, the impeller by the
wear-resistant metal or natural rubber, polyurethane and synthetic
rubber. Depending on the fluid in the pool, different shaft lengths
and straw sizes can be selected. They are designed to pump the
slurry with abrasive, large particles and high concentrations.
- The pump is vertical structure, when the pump is immersed in the
liquid, it is easy to start. There is no evacuation problem, and it
has the characteristics of no leakage. The depth of liquid can
reach 0.5 ~ 7 meters. In the use of head range to ensure that the
motor is running without overload. A single pump and double pipe
installation two installation, support a disk and disk
- Adopting large channel anti blocking hydraulic component design,
greatly improve the pass capacity of dirt, can effectively through
the pump caliber of 5 times fiber material and diameter of pump
diameter of about 50% of solid particles.
- The utility model has the advantages of compact structure, small
size, convenient movement, simple installation, etc.. According to
the required level changes, automatic control of pump start and
stop, without special supervision, use is very convenient.
- Mechanical seal adopts double channel series sealing, the material
is hard wear resistant tungsten carbide, with durable,
wear-resistant and other characteristics, can make the pump safe
and continuous operation for more than 8000 hours. The utility
model has the advantages of reasonable design, matched motor, high
efficiency and remarkable energy saving effect.
- Suitable for chemical, petrochemical, pharmaceutical, mining, paper
industry, cement plant, steel plant, power plant, coal processing
industry, as well as the city sewage treatment plant drainage
system, municipal engineering, construction industry,
transportation of sewage and pollutant particles, but also can be
used for pumping water and corrosive medium
- When used, the medium temperature is not more than 70 degrees
centigrade, and the medium is 1 to 1.3kg/dm3. Cast iron material
use medium pH value in the range of 5~9. 1Cr18Ni9Ti stainless steel
can be used with a variety of corrosive media.
Note: if the user has special temperature, medium and other
requirements, please specify the delivery medium when ordering, in
order to provide more reliable products.
Wooden box or as per customer's request
Our products are shipped by sea / air / rail, while shipping by sea
is the most popular form of cost performance.
We can provide high quality pump and accessories, provide high
chromium mud pump and ISO 5199 standard pump. You can also
according to your drawings oem. Upgrade your current pump product.
|Type||Allowable Mating Max. Power(Kw)||Range Of Performance||Impeller|
|Capacity/Q||Head/m||Speed/rpm||Max Efficiency/%||No. of Vanes||Impeller Diameter/mm|
The SPGEM(R) series solid waste pump are vertical, centrifugal
slurry pumps submerged in sump during operation. They are designed
for delivering highly abrasive, large particles and high density
slurries. These sump pump have no need of any shaft seal and
sealing water. The pump casing of type SPGEM pumps are made of
wear-resistant metal. The wear parts are made of high chromium for
the SP series and are rubber lined for the SPGEMR series.
Abrasion resistant, no clogging
The solid waste pumps are suited for handling abrasive or
corrosive, dense slurry with large particle size, SPGEM (SPGEMR)
sump pump are mainly applicable to transport abrasive, coarse
particle, high concentration slurry. They are widely used in
metallurgy, mining, coal, electric power, building materials,
environmental protection and other departments
1.Widely used for electric power.
2.Widely used for building materials.
3.Widely used for metallurgy.
4.Widely used for mining.
5.Widely used for coal.