|Pump Description||Standard Material||Material Options|
|Shaft||4140 Mild Steel||Available on Request|
|Bearing Housing||Cast Iron|
|Upper Strainer||Rubber||Cast Iron|
|Lower Strainer||Cast Iron|
|Back Liner||27% Chrome White Iron|
|Pump Casing||27% Chrome White Iron||Rubber Lined White Iron|
|Impeller||27% Chrome White Iron||Rubber|
|Discharge Pipe||Mild Steel||Rubber Lined Mild Steel/ Composite|
|Adaptor Plate||Mild Steel|
40PV-SPGEM Centrifugal Slurry Pump / Vertical sump pumps
- The pump has a single shell structure, light weight, small size,
easy installation and maintenance.
- The 40 PV-SP(R) mud pump is made of wear-resistant metal, with a
single shell structure, light weight, small size, easy installation
and maintenance. It can be immersed in the sink and pool work. The
extended shaft (L Series) drain pump is suitable for deeper liquid
operation. Add the guide bearing on the pump to make it run more
- The washing water should be fixed on the position of the guide
bearing. They are designed for the delivery of high abrasive, large
particles and high density slurries which do not require any shaft
seal and seal water even if the intake is inadequate.
- All parts of the pump are equipped with rubber gaskets for
conveying non - edge abrasive slurries. And the world's famous pump
exactly the same, parts can be completely interchangeable with the
world's famous pump.
- The shell is made of wear-resistant metal, and the impeller is made
of abrasion resistant metal or natural rubber, polyurethane and
synthetic rubber. Depending on the fluid in the tank, different
shaft lengths and straw sizes can be selected.
- Pump body material: cast iron, ductile iron, cast steel, stainless
- Impeller material: bronze, cast iron, bronze / brass, stainless
- Shaft material: carbon steel, stainless steel
- Sealing rings for shell materials: bronze, cast iron, brass,
- electric power
- Sump drainage washdown
- environmental protection
- Floor drainage
|Type||Allowable Mating Max. Power(Kw)||Range Of Performance||Impeller|
|Capacity/Q||Head/m||Speed/rpm||Max Efficiency/%||No. of Vanes||Impeller Diameter/mm|
SPGEM heavy duty sump pumps are vertical, shaft driven centrifugal
slurry pumps designed for transferring abraisive and high density
slurries from sumps, pits and other submersible sources.
-Models are available in sizes ranging from 40mm to 250mm discharge
and are capable of flow rates from 5 to 350 litres per second
(79-5540 USGPM) at heads of up to 40 metres (130ft). The heavy duty
design of the MSP pumps allows the passage of large particles with
a diameter of up to 50mm.
-Pumps will continue to operate even when the top inlet is not
submerged, allowing the liquid level to to be lowered to the bottom
of the sump or pit. Suction extension pipes of up to 2metres in
length can be added to the bottom inlet of the pump to extend the
-Designed as a fixed installation the MSP provides reliable pumping
performance with minimal maintenance requirements and simple
The standard SPGEM pumps feature a cantilevered shaft which is up
to 2400mm long. The cantilevered shaft means that there is no shaft
sealing requirement and the drive end bearings do not come into
contact with any pumped product. This reduces the risk of bearing
failure and extends the wear life of the pumps.
HEAVY DUTY WET END
Wet end components are manufactured from high quality 27% chrome
white iron or rubber coated steel for exceptional wear resistance
and service life with minimal corrosion. The heavy duty design can
pump high density and abraisive slurries and the large passages of
the impeller allows the transfer of large particles without
blockages in a wide range of mining, processing and heavy
industrial applications. Wet end stub shaft options are available
to suit severe duty applications.
COLUMN AND DISCHARGE PIPES
Column and discharge pipes are available in a range of materials to
suit the requirements of operators. Standard options include mild
steel and rubber lined mild steel. Composite options are available.
VERSATILE DRIVE OPTIONS
SPGEM pumps can be directly driven using electric motors or belt
driven with either set speed or variable speed operation.
SPGEM pumps feature rubber or cast iron upper strainers and cast
iron lower strainers to prevent blockages. The strainers are easily
removed for servicing or replacement.
"L" MODELS EXTENDED SHAFT
The extended shaft "L" model features column bearings and shaft
seal which further extends the pumping depth and enables the
transfer of slurries from deeper sumps and pits.
The SPGEM Heavy Duty Sump Pumps are capable of providing reliable
and efficient performance for the transfer of abraisive and high
density slurries from sumps, pits and tanks in a wide range of
mining, processing and heavy industrial applications.